Ricardo M. S. Sendão

Abstract Carbon dots (CDs) have attracted considerable interest from the scientific community due to their exceptional properties, such as high photoluminescence, broadband absorption, low toxicity, water solubility and (photo)chemical stability. As a result, they have been applied in several fields, such as sensing, bioimaging, artificial lighting and catalysis. In particular, CDs may act as sole photocatalysts or as part of photocatalytic nanocomposites. This study aims to provide a comprehensive review on the use of CDs as sole photocatalysts in the areas of hydrogen production via water splitting, photodegradation of organic pollutants and photoreduction and metal removal from wastewaters. Furthermore, key limitations preventing a wider use of CDs as photocatalysts are pointed out. It is our hope that this review will serve as a basis on which researchers may find useful information to develop sustainable methodologies for the synthesis and use of photocatalytic CDs.

Abstract PFASs are a class of highly persistent chemicals that are slowly infiltrating soils and waterways. Thus, there is a great need for fast, sensitive, and reliable techniques to detect PFASs. Conventional methods, such as LC-MS/SPE, allow high sensitivities. However, such methods can be complex and expensive. Considering this, it is not surprising that the scientific community has turned their attention to the search for alternatives. New types of PFAS sensors have been reported over the years, being generally part of three classes: optical, electrochemical, or hybrid sensors. Carbon dots (CDs) are new alternative fluorescent sensors that can present great affinity towards PFASs, while allowing for a fast response and promising sensitivity and selectivity. Furthermore, CDs have more attractive properties than traditional fluorophores and even metal-based nanomaterials that make them better candidates for sensing applications. Thus, CDs display great potential for permitting a fast and accurate quantification of PFASs. This review aims to serve as a basis for the future development and optimization of CD-based fluorescent sensors for PFASs.

Abstract Pharmaceuticals are becoming increasingly more relevant water contaminants, with photocatalysts (such as TiO2) being a promising approach to remove these compounds from water. However, TiO2 has poor sunlight harvesting capacity, low photonic efficiency, and poor adsorption towards organic pollutants. One of the emerging strategies to enhance the photocatalytic performance of TiO2 is by conjugating it with fluorescent carbon dots. Herein, we performed a critical review of the development of TiO2 - carbon dots nanocomposites for the photocatalytic removal of pharmaceuticals. We found that carbon dots can improve the photocatalytic efficiency of the resulting nanocomposites, mostly due to increasing the adsorption of organic pollutants and enhancing the absorption in the visible range. However, while this approach shows significant promise, we also identified and discussed several aspects that need to be addressed before this strategy could be more widely used. We hope that this review can guide future studies aiming to the development of enhanced photocatalytic TiO2 - carbon dots nanocomposites.

Abstract Carbon dots (CDs) are carbon-based nanoparticles with remarkable luminescent properties, which have made them exciting and suitable alternatives to more traditional fluorophores and even to more recent luminescent nanomaterials (such as metal-based quantum dots). However, despite this high interest on CDs, there has been no focus on their sustainable development and fabrication, and so, there is lacking concrete data on their environmental impacts. A life cycle assessment (LCA) approach was used here to compare and understand the environmental impacts of carbon dots (CDs) obtained via six representative bottom-up synthetic strategies (cradle-to-gate). These routes consist on hydrothermal and microwave-assisted synthesis of CDs derived of citric acid (with the occasional addition of urea), which represent current trends in the synthesis of CDs. Results show that for hydrothermal synthesis the use of electricity is dominant for almost all environmental categories, while citric acid produces most impacts for microwave-assisted synthesis. A performance-based comparison was also made by rescaling results with the fluorescence quantum yield of the CDs. This approach changed the rank order of preference in all categories by a significant margin. While previous analysis indicated microwave-assisted synthesis of citric acid-derived CDs to be the most benign in environmental terms, now the option is the synthesis (either by hydrothermal or microwave-assisted treatment) of urea and citric acid-derived CDs.

Abstract The selective fluorescence sensing of fructose was achieved by fluorescence quenching of the emission of hydrothermal-synthesized carbon quantum dots prepared by 3-hydroxyphenylboronic acid. Quantification of fructose was possible in aqueous solutions with pH of 9 (Limit of Detection L-OD and Limit of Quantification L-OQ of 2.04 and 6.12mM), by quenching of the emission at 376nm and excitation similar to 380nm with a linearity range of 0-150mM. A Stern-Volmer constant (K-SV) of 2.11x10(-2)mM(-1) was obtained, while a fluorescent quantum yield of 31% was calculated. The sensitivity of this assay towards fructose was confirmed by comparison with other sugars (such as glucose, sucrose and lactose). Finally, the validity of the proposed assays was further demonstrated by performing recovery assays in different matrixes.