Porkodi Kadhirvel

Abstract A novel, straightforward, and environmentally friendly direct coupling procedure to immobilize carbohydrates on solid supports is presented. A characterization study showed that all amino groups on solid supports participated in the linkage with a carbohydrate unit, implicating that the surface load can be easily adjusted by tuning the amination coverage of the surface. Most importantly, the integrity of the cyclic conformation of the linked sugar unit was demonstrated, a feature that is critical for most of the possible applications of carbohydrate-functionalized surfaces. Furthermore, carbohydrate-immobilized submicron particles synthesized by the direct coupling method, on which lectin profiling experiments were conducted, validated the successfulness of our simplistic approach.

Abstract Different kinds of molecularly imprinted particles were synthesized and compared, aiming at the development of materials combining high molecular recognition capabilities and facile use as column packing materials for chromatographic aqueous applications. Solution, inverse-suspension and precipitation polymerization were considered and two different model molecules (5-fluorouracil and caffeine) were used to highlight the effect of the interaction between the template molecule and the functional monomer on imprinting efficiency. Particles synthesized through the proposed inverse-suspension process exhibit facile use for packing columns, allow the stable running of chromatographic systems and present a high performance in drug uptake and release in aqueous media. Frontal analysis measurements highlight these key features of the synthesized particles. Drug sorption capabilities of 0.890 mu mol/g and 5.774 mu mol/g were measured for 5-fluorouracil and caffeine, respectively, using frontal analysis with eluents containing the target molecules at concentration 0.1 mM. Due to the lower amount of solvent required than with precipitation polymerization, the developed inverse-suspension process presents high synthesis yields, which can be exploited for the large-scale manufacture and commercialization of molecularly imprinted materials. The combined features of the particles makes possible their direct use in bioseparations or in the development of assays and pharmacokinetic studies concerning the presence of drugs in biological fluids.

Abstract Novel results concerning the inverse vulcanization of sulfur using reversible addition-fragmentation chain transfer (RAFT) polymerization are here reported. It is shown that RAFT polymerization can be used to carry out this crosslinking process, with the additional possibility to extend the reaction time from a few minutes as with classical free radical polymerization (FRP) to several hours. Higher control on viscosity and processability of the synthesized networks, as well as, the implementation of semibatch feed policies during crosslinking are important advantages of the RAFT process here explored comparatively to the FRP inverse vulcanization. Using cyclic voltammetry, it was assessed the electrochemical activity of the synthesized sulfur-rich polymer networks. It is shown that the fundamental electrochemical activity of the elemental sulfur was preserved in the produced materials. Testing of electrochemical cells assembled with lithium in the anode and different sulfur based materials in the cathode, including the synthesized RAFT networks, is also shown. The results here presented highlight the new opportunities introduced by reversible-deactivation radical polymerization mechanisms on the control of the synthesis process and in the design of such advanced materials and show also that many potential derivatizing possibilities can be achieved. (c) 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43993.

Abstract The multifunctional alkoxysilane precursor, 2,6-bis(propyl-trimethoxysilylurelene)pyridine (DPS) was designed and synthesized, envisaging a multiple hydrogen-bond interaction in the molecular imprinting of the drug aminoglutethimide (AGT). Imprinted xerogels were obtained in bulk and spherical formats. The spherical format was achieved by pore-filling onto spherical mesoporous silica, as a straightforward technique to generate the spherical format. The bulk gels presented better selectivity for the template against its glutarimide (GLU) analogue (selectivity factor: bulk 13.4; spherical 4.6), and good capacity (bulk 5521 mu mol/L; spherical 2679 mu mol/L) and imprinting factor parameters (bulk 11.3; spherical 1.4). On the other hand, the microspherical format exhibited better dynamic properties associated to chromatographic efficiency (theoretical plates: bulk 6.8; spherical 75) and mass transfer, due mainly to the existence of a mesoporous network, lacking in the bulk material. The performance of the imprinted xerogels was not as remarkable as that of their acrylic counterparts, previously described. Overall it was demonstrated that the use of designed new "breeds" of organo-alkoxysilanes may be a strategy to achieve satisfactory imprints by the sol-gel processes. DPS may in principle be applied even more effectively to other templates bearing better-matching spatially compatible acceptor-donor-acceptor arrays.

Abstract BACKGROUNDStimuli responsive imprinted hydrogel micro-particles were prepared using reversible addition-fragmentation chain transfer polymerization for targeting genotoxic impurity aminopyridine in aqueous environment using a continuous flow micro-reactor. RESULTSThe feasibility of operation with a continuous flow micro-reactor for particles production was demonstrated. A comparative evaluation was carried out between batch and micro-reactor produced imprinted and non-imprinted hydrogels. Experimental results proved that molecular imprints generated by free radical polymerization and controlled radical polymerization showed outstanding performance in adsorption behavior: the q value estimate was about 1000 times higher than the value presented by other researchers. Solid phase extraction results further evidenced the promising imprinting with hydrogels using free radical polymerization and controlled radical polymerization by retaining c. 100% of 3-aminopyridine. The imprinting factor of 4.3 presented in this research appears to be the best value shown so far. CONCLUSIONThe imprinted materials were successfully prepared both in batch and with a continuous flow micro-reactor. The inclusion of a reversible addition-fragmentation chain transfer agent in controlled radical polymerization was important in optimizing the experimental conditions in the continuous microfluidic approach. Though the reversible addition-fragmentation chain transfer agent was very useful in controlling the reaction kinetics, imprinted micro-particles showed the existence of both non-specific and imprinted sites. It is worth extending this work to demonstrate the impact of reversible addition-fragmentation chain transfer agents in molecular imprinting, considering also operation in a continuous flow micro-reactor to obtain tailored smart hydrogel particles. (c) 2015 Society of Chemical Industry